6 Free DIY Bluebird House Plans From Available Materials

Attracting bluebirds is a wonderful way of inviting nature right into your backyard. But to achieve that, you need a bluebird house plan.

Well, there are different types of bluebird house plans you can use to construct a bird shelter. In this article, we share with you 6 plans for bluebird house.

The best part is that it can be done by anyone, not just the avid hobbyists. But before we go there, lets first look at requirements for a bluebird house. DIY landscaping, DIY woodworking project, DIY best, DIY for your garden.

Bluebird House Requirements:

  • Should be placed in appropriate locations to prevent competition. You can do that by placing the houses 100 yards apart and put screening trees between them.
  • Bluebirds don’t like nesting in shade or deep wood. So you need to place the house in an open area away from trees and buildings.
  • Don’t paint your bluebird house. Bluebirds are more likely to use them when left as natural wood. In case you must paint, don’t use dark colors to avoid overheating.
  • Always leave the edges smooth to ensure the birds’ feathers are not damaged.
  • Bluebird houses should be mounted to a height of 5 to 7 feet above the ground. This is to keep them safe from predators.

Now let’s see 6 DIY bluebird house plans and hope you can pick up an ideas

 

1. DIY Bluebird Box for Eastern/Western Bluebird

DIY Bluebird Box for Eastern/Western Bluebird

Warren H. Lauder, a bluebird house expert, designs this bluebird house. His aim is to build a birdhouse for both Eastern and Western bluebirds.

Warren uses wood and shingles to build. The wood is used in all sections. Entry hole and vent holes are drilled into the sides. The vent holes give good ventilation.

The front part is designed like a swing door. This is useful since it makes cleaning much easier. Warren makes the roof slope for good drainage.

The cracks are sealed using caulking compound to keep the rain out. Additional protection from the rain is achieved by covering the roof in waterproof material. Here, Warren uses asphalt shingle.

There are two things you need to note here. The first one is that the wood should be at least 3/4 inches thick. The second one is that you should avoid using particleboard or plywood.

Warren recommends using white pine for its good natural resistance to weather. This is a project you can do alone and only takes a couple of hours.

Prev1 of 6

Leave a Reply

Your email address will not be published. Required fields are marked *